Skip to content

We may be paid when you buy through our links. Who pays us never changes what we show. How we make money

Explainer5 min read

How the 4Cs are graded: GIA's scales explained

How GIA grades diamond color, clarity, cut and carat weight, and what the FTC Jewelry Guides add about how grades are advertised.

On this page
  1. How the 4Cs are graded, in short
  2. Color: comparing against masterstones
  3. Clarity: 11 grades at 10x magnification
  4. Cut: Excellent to Poor, for round brilliants only
  5. Carat: a weight, measured in points
  6. Lab-grown or mined: a separate question
  7. What to check next

How the 4Cs are graded, in short

Each of the 4Cs has its own yardstick. Color is graded on a letter scale that runs from D for colorless to Z for light yellow, brown or gray.1 Clarity has 11 grades, from Flawless down to Included.2 Cut is graded from Excellent to Poor, but only for standard round brilliants.3 Carat is not a grade at all. It is a weight, and one metric carat equals 200 milligrams.4

Below is how GIA, the lab behind these scales, applies each one, and what the FTC's Jewelry Guides (the US agency's guidance on how to avoid deceptive jewelry claims) say about how sellers describe a stone, as of October 2026.5 Prices and individual jewelers are outside the scope here.

Color: comparing against masterstones

Color grading is a side-by-side job. A grader looks at the diamond under controlled light next to masterstones, which are reference diamonds whose grades are already fixed.1 The grade is the letter on the D-to-Z scale that the stone matches.1

GIA introduced this scale in 1953.1 Before then, letters, numbers, Roman numerals and phrases like "blue white" were all used, which led to confusion.1 Starting at D was deliberate: it kept the new grades from being mixed up with the older systems.1

Yellow or brown stones with more color than a Z masterstone, or stones with a color other than yellow, gray or brown, are generally called Fancy.1 GIA notes that no universal guidelines govern that term.1 The FTC guides also address one piece of old wording. The FTC guides treat "blue white" as deceptive for any diamond that shows a trace of a color other than blue or bluish under north daylight.5

Clarity: 11 grades at 10x magnification

Clarity measures the small features, which GIA calls birthmarks, that many diamonds carry from their formation.2 GIA calls internal features and those reaching the surface inclusions, and purely external marks blemishes.2 The grade depends on the number, size, relief, nature and location of these features.2

Magnification is part of the definition. GIA's standard is that clarity grading can only be finalized with a 10x loupe, a small hand magnifier.2 The scale has six groups and 11 grades: Flawless (FL), Internally Flawless (IF), VVS1 and VVS2, VS1 and VS2, SI1 and SI2, and I1, I2 and I3.2 An IF stone has no visible inclusions but does have blemishes.2 GIA says most diamonds seen in jewelry stores land between VS and SI.2

The FTC guides lean on the same idea of magnification. Under the FTC guides, calling a diamond "flawless" is deceptive if it shows flaws or blemishes when checked this way:5

examined under a corrected magnifier at 10-power, with adequate illumination, by a person skilled in diamond grading

Federal Trade Commission, via eCFR, 16 CFR Part 23, Guides for the Jewelry, Precious Metals, and Pewter Industries5

The word "perfect" carries an extra condition: the stone must meet the flawless test and not be of inferior color or make.5

Cut: Excellent to Poor, for round brilliants only

GIA limits where its cut scale applies:

Diamond cut grades are only given to round brilliant cut diamonds because they are the only cut that have standardized facets.

Gemological Institute of America (GIA), Diamond Cut3

Ovals, pears, emeralds and other outlines are fancy shapes, so a GIA cut grade does not apply to them.3 Our page on fancy shape diamond prices covers those shapes.

For a standard round brilliant in the D-to-Z color range, GIA assesses three things: face-up appearance, design and craftsmanship.3 Face-up appearance covers brightness, fire (light split into spectral colors) and scintillation, the pattern of light and dark areas and the sparkle as the stone moves.3 Design covers weight ratio and durability, and craftsmanship covers polish and symmetry.3 A round brilliant has 57 or 58 facets, the 58th being the tiny culet at the bottom.3

The FTC guides also address cut words in ads. An unqualified "brilliant" or "full cut" is reserved for a round diamond with at least 32 facets plus the table above the girdle and at least 24 below.5 A stone that is lopsided, or so thick or thin that its brilliance suffers, should not be called "properly cut".5

Carat: a weight, measured in points

Carat measures weight, not size. A metric carat is 200 milligrams, split into 100 points.4 GIA notes that weight can be measured to the thousandth of a carat for rounding.4

The FTC guides address how that weight is stated in an ad. A weight given in points should also appear as decimal parts of a carat, such as 25 points or .25 carat.5 A figure given to one decimal place should be accurate to the second decimal place, so ".5 carat" could mean anything from .495-.504.5 When a seller uses fractions, the guides call for a clear note nearby that the weight is not exact, plus the range or tolerance used.5

Weight also has pricing quirks. GIA describes 1.00, 1.50 and 2.00 carats as magic sizes, and says a 0.99 carat stone is hard to tell from a 1.00 carat by eye even though the price gap can be significant.4 We look at those steps in carat weight and price. GIA's broader point is that value reflects all 4Cs, not carat weight alone.4

Lab-grown or mined: a separate question

The FTC's Jewelry Guides say sellers should use words that correctly describe a stone so shoppers know what they are buying.6 In a 2019 review of social media ads, FTC staff found some that may have suggested a lab-made diamond was mined, and sent warning letters to eight businesses.6 The FTC lists natural, lab-created and imitation as terms worth knowing, since those stones differ in value and care.6 For how the two kinds of diamond compare on price, see lab-grown vs natural diamonds.

What to check next

  • The report number. GIA's 4Cs pages point to GIA Report Check, where a GIA report number brings up the lab's own results to compare with a listing.1
  • The clarity grade. Compare the listed grade with the 11-grade list on GIA's Diamond Clarity page.2
  • Whether a cut grade applies. On GIA's Diamond Cut page, confirm the stone is a standard round brilliant before reading anything into an Excellent to Poor grade.3
  • How weight is written. In 16 CFR Part 23, section 23.18 sets out how decimal, point and fractional weights should be stated in ads.5
  • Natural or lab-made wording. The FTC alert on diamond jewelry ads names natural, lab-created and imitation as the terms to look for.6

Sources

  1. Diamond ColorGemological Institute of America (GIA), read Oct 29, 2026
  2. Diamond ClarityGemological Institute of America (GIA), read Oct 29, 2026
  3. Diamond CutGemological Institute of America (GIA), read Oct 29, 2026
  4. Diamond Carat WeightGemological Institute of America (GIA), read Oct 29, 2026
  5. 16 CFR Part 23, Guides for the Jewelry, Precious Metals, and Pewter IndustriesFederal Trade Commission, via eCFR, read Oct 29, 2026
  6. Ads for diamond jewelry should be crystal clearFederal Trade Commission, read Oct 29, 2026

We may be paid when you buy through links on this page. How we make money